EM-C SP PP/PVDF – ATEX SELF-PRIMING Mag drive Centrifugal Pumps

Self-priming magnetic drive centrifugal pumps made in thermoplastic materials suitable to be used in a potentially explosive atmosphere classified ZONE 2 II3G

Anti-corrosion industrial pumps suitable for pumping acids and bases fluids and highly corrosive liquids

Materials available: PP / PVDF.
Materials in contact with the liquid;
Pump housing: PP or PVDF;
Impeller: PP or PVDF
O-ring: EPDM (standard for PP pumps);
VITON (standard for PVDF pumps);
static shaft: Al2O3 99,7 %;
Bearing PTFEC.
Capacity up to 25 m3/h; Head up to 22 m.
Temperature: PP: max 70°C – PVDF: max 90°C.
Max viscosity: 20 cSt.
Pressure rating: NP 6 at 20°C.
Self-priming up to 6m at sea level.
Suction connection available in 3 welded configurations (frontal, on the right and on the left).

ATEX Self-priming mag drive centrifugal pumps series EM-C SP PP/PVDF are made of thermoplastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. EM-C SP pumps combine the typical features of our mag drive centrifugal pumps with the self-priming capability. At sea level these pumps can prime up to 6 meters Thanks to the innovative mag drive system, pumps model EM-C SP PP/PVDF reduce the risks of leakage and emissions and the maintenance costs. The transmission of the motion occurs through magnetic joints without any mechanical seal and this design guarantees the maximum safety and efficiency. The pumped liquid has to be clean and without solids in suspension. These pumps are suitable to be used in a potentially explosive atmosphere classified ZONE 2 II3G